Women in Tech: Hedy Lamarr
It was back in 1941 when Hedy Lamarr, an Austria born actress, together with George Antheil co-patented a “secret communication system” which allowed radio control of torpedoes that could not be easily discovered, deciphered or jammed. Her secret: frequency hopping! Coordinated, rapid changes in radio frequencies would literally “hop” in the radio spectrum, thus evading detection and the potential of interference, in other words, being suppressed or jammed. Even though her idea was ahead of its time and not implemented in the U.S. until 1962, when it was used by U.S. military ships during a blockade of Cuba (after the patent had expired), it is now the basis for modern Frequency Hopping Spread Spectrum (FHSS) wireless communication systems. FHSS wireless systems are very resilient when it comes to impairments such as interference (deliberate or coincidental) and “jamming.” Other effects can be observed when wireless signals travel through space, such as the “multipath” phenomenon, simply because they use only very small amounts of radio spectrum at a time and don’t dwell (or remain) at that frequency long, instead “hop” to another frequency quickly. Statistically, chances are that the signal does not “land” at the interfering frequency, thereby successfully evading the jamming signal. This makes Denial of Service (DoS) attacks on FHSS systems very difficult, albeit not completely impossible. Information Pioneers – Hedy Lamarr Edition As part of BCS, The Chartered Institute for IT video series, Miranda Raison presents Hedy Lamarr for the “Information Pioneers” series and dives deeper into the history behind one of wireless communication’s leading ladies who, together with George Antheil, pioneered the beginning of a communication revolution. Hedy Lamarr would’ve been 101 years old this November.
IoT is for Automotive
The Internet of Things (IoT) has made an appearance in just about every industry (including automotive) that uses automation and has opened the door for the automation of pretty much anything and everything. Today, there are more devices than people and by 2020 there is expected to be 26 Billion – 50 Billion internet connected devices being used throughout the world. If one thing is true – and if the staggering stats above are any indication – we’re headed towards a fully connected world at a very high speed. Think about everything we can do now that wasn’t possible just a few years ago. We can lock our doors and shut off the thermostat from an app on our phone. At the push of a button, we can buy laundry detergent and have it shipped to our home. Industries with geographically dispersed and remotely located assets can cost-effectively add sensors and smart devices to every single network endpoint – to automate systems and drive intelligent business decisions locally and from afar. Racetracks are the next place IoT is surfacing, while automobiles with infotainment systems (connected by the IoT) continue to fill the streets. Autonomous Automobiles In the tech world, you’ve probably seen industry buzz and research data that verifies the reality of autonomous (or at least semi-autonomous) vehicles commonly traveling our roads in the near future. In fact, a few of the most innovative car manufacturers have already released vehicles with some autonomous features. If anything is for sure it is that the driverless car is much more than a fantasy today– there are people working to develop these vehicles right now. In the meantime, IoT has already begun to leave its mark on the automotive industry. So, what are some real life examples of unique ways that IoT communication solutions are being used in the automotive industry today? The Racing Industry The auto racing industry can automate many systems and processes for drivers and also generate data to support real-time decision making with IoT communication solutions. In one use case, IoT technology enables video data and high speed connections through a point-to-point system. With the data made available to drivers, they are able to adjust their racing strategy in real-time and make smarter decisions that decrease risk and save time. Electronic Car Testing For one electronic car manufacturer, IoT communication solutions are being used for engine testing and maintenance by using real time kinematics (RTK) base station communications to improve data and correlation. What Helps Drive the IoT for Automotive? Sensor-to-Server (S2S) communications have emerged as an essential solution for IoT networks in a variety of industries from industrial settings like oil and gas, to environmental monitoring, to the automotive industry. S2S solutions that are designed specifically for industrial-grade IoT networks, offer high speeds and extended distance connectivity via RF technology that can also support third-party applications. These solutions meet the demanding needs for collecting, protecting, transporting and controlling data from network end points all the way back to the server. As the world around us becomes more connected on a daily basis, we’ll continue to see new innovations released in many different marketplaces. In the automotive industry, IoT is leading to the inevitable release of autonomous vehicles. We can expect to see S2S communications play an increasingly important role for auto manufacturers looking to improve innovation and connect the network devices that were previously not connected.
IoT Weekly Roundup
The IoT weekly roundup is designed to share the latest and most interesting news from the past week. As the industrial and consumer IoT space continues to heat up, we decided to uncover some very unique IoT applications that many didn’t even know existed. As the connected world continues to advance in the emerging digital age, virtually every facet of our lives is now being impacted by the IoT. In this week’s addition of IoT weekly roundup, we explore M2M, sensors, automation, drones and IoT language. Dive in and enjoy this week’s highlights! Weekly Roundup of News How M2M and IoT enable new data-intensive applications By @dhdeans | Published on @TTech_News “During the last couple of years, machine-to-machine (M2M) technology has become an integral part of the services offered by global telecom providers and a significant revenue stream for M2M app specialists. They’ve developed comprehensive offerings, designed to reduce costs and increase efficiency.” Sonar Mapping Sensors Help Understand Where Life Can be Found Underwater By Brooks Hays | Published on @UPI “New maps charted using sonar sensors have revealed the importance of ‘marine snow’ to the distribution of biomass on the ocean floor. Until now, mapping the ocean floor’s terrain, as well as distribution of marine snow and biomass, has proven difficult.” Rail and Production Technology Parallels When it Comes to Automation By @DJGreenfield | Published on @automationworld “Explaining the IoT trend in rail, Weatherburn said that IoT is increasing interest in greater connectivity for operations optimization reasons. It’s also driving a move away from proprietary protocols and toward greater use of standard Ethernet. He noted that this is particularly true in rail when it comes to the delivery of communications and entertainment for the railway customer, pointing out that the rail industry is looking to carry both sets of data over standard Ethernet.” Indie Sci-fi Film Shot Entirely by Autonomous Drones By @trentlmoore | Published on @blastr “Drone cameras are being used in just about everything nowadays, from sports coverage to emergency response, but what happens when you shoot a movie entirely from the sky?” The connected IoT is spawning a new vocabulary By @pmcfedries | Published on @IEEESpectrum “A big chunk of the Internet of Things consists of wireless transceivers combined with sensors, which can reside in appliances, devices, clothes, machinery, buildings—just about anything physical. Of course, the phrase ‘wireless transceiver combined with sensors’ is unwieldy, so such a node of the IoT is called a mote (short for remote).” As we conclude our IoT weekly roundup, we hope you enjoyed learning about all the new applications and insights related to the powerful force of the Internet and connected technologies. Now go out and see what other IoT applications you can uncover!
Seismic Shift in IIoT Monitoring
There’s been a seismic shift in monitoring earthquakes via the Industrial Internet of Things (IIoT) with advanced Machine-to-Machine (M2M) technology have reshaped the industrial communication industry. Every device or machine along the network, even at the outermost edge, now has the opportunity to be fully-connected for automated collection and delivery of information. As Sensor-2-Server (S2S) communication technology evolves to keep up with the demand for this connectivity paradigm, new efficiencies are created and Big Data is available to drive actionable intelligence. Seismic Shift Data that Saves Lives The sheer quantity of available data, combined with the speed of automation can support mission critical applications that are designed to save lives. Research centers can leverage IoT networks to relay critical data in real-time from areas where earthquakes are a common threat to people living nearby. While natural events like earthquakes and volcanos are not avoidable or fully predictable, an IoT network can potentially help reduce the level of devastation through close, reliable seismic monitoring via highly sensitive and advanced sensor technology. S2S communications monitor and send data from remote areas where Earth changes are first detected, to the monitoring authorities who are closely tracking seismic activity. S2S solutions leveraged for early detection of these events can enable authorities to warn citizens in advance to take appropriate precautionary measures. When robust, rapid, real-time monitoring is combined with effective emergency communications, human casualties can be significantly decreased. Seismic Shift and the Ever Changing Landscape IoT has been adopted at such a rapid pace that the demand for modern, sophisticated communication technology is driving constant changes in remote, industrial communication networks that will further advance applications like seismic monitoring. These changes have clearly disrupted the traditional Supervisory Control and Data Acquisition (SCADA) market. While SCADA systems are not obsolete, industries like environmental monitoring will continue to leverage new technologies designed to help seismologists make more informed decisions than with just SCADA alone. Now, network operators can evolve and adapt their monitoring programs over time through the IoT with edge devices that allow third-party software applications to be deployed network-wide. This has not only opened new doors for software developers, but it opens up the opportunity for advancements in environmental monitoring to further improve natural event monitoring. Fast and accurate data transport from the sensor networks in seismic monitoring therefore requires robust and reliable technology that doesn’t fail in remote and sometimes harsh environments. RF technology, for example, is advancing to help field crews make intelligent decisions and closely monitor the elements that can help delivery early warning for natural events. Find us at JavaOne this Week
Top Industrial IoT News Roundup
There is a lot happening in the industrial IoT (IIoT) space lately, as evidenced by all the recent news announcements, analyst insights and business transactions occurring on the daily. Some say there is a foggy forecast for the industrial internet of things, mainly because the success of cloud computing must extend beyond data centers, but real world use cases should continue to pave the way. In some respects, perhaps it’s just the fact that the ROI from the IIoT is still in its infancy, but many are clamoring that a more standardized infrastructure is needed to help solve the unique complexities that IIoT presents. In this week’s IIoT news roundup, you’ll find a little bit of everything – from oil and gas and manufacturing to fog computing, drones and sensors. Dive in and see if you have any other articles that you think are worth adding! And don’t miss the bonus update at the end of the news roundup. Deloitte: End-to-End Automation Real Value of IIoT Technology By @KarenBoman | Published on @Rigzone “Industrial Internet of Things (IIoT) technologies such as machine learning and drones are now available, but the real value lies in linking these technologies together to allow for end-to-end automation, a Deloitte executive told attendees at the Internet of Things Oil and Gas Conference 2016 Wednesday in Houston.” Is Now the Time to Apply Fog Computing to the Internet of Things? By Dr. Vladimir Krylov @Artezio | Published on @IoTEvolution “With fog computing, latency is minimized if one uses fog nodes for data analysis without sending it to the cloud. All event aggregation in this case has to be performed in the distributed architecture deployed in the network where devices (sensors) and fog nodes are located. Thus, fog architecture moves the capacity question from the cloud to the network implementation.” Manufacturing firms investing in IIoT data analytics – even if other areas are slowing down By @James_T_Bourne | Published on @IoTTechNews “The research, the findings of which appear in the report ‘Data’s Big Impact on Manufacturing’, found that of the more than 200 North American manufacturing executives polled, 70% said investing in data analytics would lead to fewer equipment breakdowns, while less unscheduled downtime (68%), unscheduled maintenance (64%), and fewer supply chain management issues (60%) were also cited.” Go Ahead, Fly a Tiny Drone. The Man Doesn’t Have to Know By @luxagraf | Published on @WIRED “THE WILD WEST days of drone flight came to end earlier this year when the FAA began requiring that pilots register their aircraft with the agency. If you want to use your Unmanned Aircraft System (as the FAA calls them) for anything remotely commercial, you’ll need to go a step further and pass a test.” Could Optical Fibre Sensors Save Lives? By @loctier | Published on @euronews “This edition of Futuris looks at how optical fibre sensors could help monitor the stability of roads, buildings, bridges and other constructions – and save lives.” Discovering Value in the Age of IIoT By @lasher64 | Published on @automationworld “The solutions of tomorrow will be much more integrated between implementation tiers on the plant floor to the enterprise and beyond. Therefore, it is imperative that these solutions give strong consideration to network architectures and cybersecurity. As we continue to move forward, you will hear more about operational technology (OT).” IoT is not about radios; it’s all about data By Alan Carlton | Published on @NetworkWorld “The initial challenge for the Internet of Things (IoT) was how to provide physical connectivity of small and often remote devices to the Internet. This issue has basically been solved with the plethora of wireless connectivity solutions. The real challenge for IoT is data organization, sharing and search on an unprecedented scale.” BONUS NEWS This week, FreeWave announced a contest at a chance to win FreeWave’s award-winning WavePro WP201 shorthaul and Wi-Fi solution. Contest entrants must provide a high-level account of the application of the WavePro, along with a description of the need for the platform. Winners will be announced at the close of the entry period. To enter the contest, please visit: http://go.freewave.com/wavepro-network-giveaway. Submissions are due by September 30!
Top News: IoT Rules at Mobile World Congress (MWC)
After a week of everything mobile, at least in Barcelona at the Mobile World Congress (MWC), it is only fitting this week’s top news recap focuses on the other three letter acronym so hotly discussed from the show – IoT. Whether you have been living under a rock or just hadn’t embraced the fascination with the latest handheld smart technologies and cellular networking, this week’s Mobile World Congress (MWC) presented by GSMA, brought together around 800 mobile operators from more than 250 companies from around the globe to discuss the latest products, software and innovations that will push the IoT space even further into maturity. Some of the key themes to come out of this year’s MWC were the fifth generation wireless systems or 5G, the impact this next-gen tech and mobile will have on the Internet of Things (IoT) and the booming IoT businesses laying the foundations of the connected world. Now as you nestle up to your favorite mobile device or smart tablet, relax and dive into this week’s IoT news roundup from MWC! MWC: 5G Key to unlocking IoT … Just Not Yet (IndustryWeek) As the MWC surged forward with excitement for 5G to finally unlock IoT, experts warn the connective battle isn’t over, as the world dives into incorporating 5G throughout. Agence France-Presse with Industry Week reports that, “5G is the term on everyone’s lips at the Mobile World Congress in Barcelona and a global race to develop it is under way.” IoT Race Heats up at MWC 2016 (RCR Wireless) The race heats up for IoT, as 2G networks scramble to find a new way to connect with the announcement of 5G at MWC 2016. “Mobile World Congress is all about the newest wireless technologies, but this year the end of an old technology is driving conversations around the Internet of Things.” This Week’s 5G Buzz Indicates IoT is Finally Kick-Starting (VentureBeat) The hot topic on everyone’s mind this week had to be 5G and the need for more IoT connectivity. Leon Hounshell, with Greenwave Systems reminds us that, “Regardless of the hype, CES and MWC do not reveal an IoT revolution, but they certainly show us a determined evolution, where devices will unceasingly become more connected, open, and smart.” Mobile World Congress: Internet of Things Business is Humming (USA TODAY) This week may have shown us a lot of shiny new IoT products for consumers, but the truth is IoT for business will really dominate deal-making. USA TODAY believes that, “It’s not hard to see why. Gartner forecasts that the market for IoT services will top $101 billion this year, nearly 30% more than the $78 billion that businesses spent last year. By 2020, spending for services like network deployment, operations management and data analytics is forecasted to balloon to $257 billion.” Mobile World Congress: Why Every Brand Should Become a Tech Brand (Campaign Live) Connectivity is everything, and moving forward in this technological age the MWC believes all companies should become a tech brand in order to incorporate IoT. Natalie Bell with Campaign Live states that, “We are now in an era of connecting everyone and everything. So, while Mark Zuckerberg is urging us to focus on the former and ensure wider basic connectivity across the entire globe, there’s a huge tech focus on the latter — the Internet of Things, which will be greater enabled by the increasing capacity in 5G. It’s this vast array of connected objects that have caught my attention this year.”
IIoT Top News: Utilities Powering Tomorrow
We’re fresh off a great week at DistribuTECH 2016 where we saw a gamut of technologies, thought leaders and trends. With utilities and energy still top-of-mind, our focus this week is on the changing face of the industry. This digital age means we have come to expect that the power will always charge, operate and run our numerous IoT devices. That’s why this week’s IIoT top news is dedicated to powering our electrical future. So, it should come as no surprise that, the electric power industry has made it their mission to protect and secure this precious power at all costs. The power initiative has teamed up with federal agencies, National Institute of Standards and Technology, and the North American Electric Reliability Corporation to continue to build its capabilities. Now as you hold tight to your digital devices, take a breath, relax, and enjoy this week’s top news roundup. Industry Pioneer: The Road to Electric Utility of the Future is Paved With Prosumer Technology (Forbes) Years later, after the initial big push for IoT with utilities, we are still hoping for better, cheaper and smarter utility solutions. Forbes suggests the future of utilities will be paved in prosumer technology. William Pentland writes, “In 2009, the U.S. government made the single largest investment ever in modernizing the U.S. power system. Nearly seven years and more than five billion in federal tax dollars later, the electric grid is technically a lot smarter than it used to be. So why do utility rates seem to be getting more – not less – stupid?” Utilities to Lead Surge of Electric-Car Charging in Southern California (Green Car Reports) Southern California now has the lead on electric-car charging stations as utility companies in the area task themselves with an aggressive plan to expand the number of station in the region. A recent report from Navigant Research suggests that, “The commencement of these projects marks a major transition for electric-car charging in California, as it marks the beginning of significant involvement from utilities.” Michigan Utilities Expected to Surpass Renewables Mandate (North American Wind Power) Each year the state of Michigan sets a level of renewable energy that must be met, only this year the Michigan Utilities is expected to surpass that mandate with a surprising amount of growth. According to the six-annual report from the Michigan Public Service Commission (MPSC), “There has been significant growth of wind generation in Michigan’s renewable energy certificate portfolio, from 7 percent in 2009 to 44 percent in 2014.” NRG Proved How Tough It Is To Change. So Who’s Poised to Become the Utility of the Future? (BreakingEnergy.com) A short time ago NRG set its sights on becoming the Google of the energy world, but as the IoT evolves it is very likely an unknown company will be the next market leader for energy worldwide. GreenTech Media argues that “the utility of the future will also have to be so much more to succeed — leveraging data, new technologies and personalization to transform the way customers consume and deliver power.” What Are Utilities Thinking Today About the Importance of Engaging with Their Customers? (Intelligent Utility) As world continues to become all things IoT, utilities need to consider how engaged they would like to be with their customers. ONZO survey results at DistribuTECH 2016 show, “Most utilities also plan to increase their investment in improving customer engagements and think that analytics are key to their ability to do so.”
DistribuTECH Day 3 Recap: Utilities-as-a-Service?
We’ve wrapped up another year at DistribuTECH, and we’re leaving Orlando feeling invigorated and excited about the industry
DistribuTECH 2016 Day 2 Recap: Renewables Rule
After the initial excitement the opening keynote, everyone spent time checking out innovations from around the industry.
DistribuTECH 2016 Day 1 Recap: People, Places and Things
Each year, we attend a wide variety of trade shows for many different vertical industries. These shows present several opportunities: we get to go talk about ourselves a little bit, we get to see what other companies and thought leaders are doing, and we get to talk with some very interesting folks who have varying perspectives on the industry, the trends and the technologies that drive growth. This year, at DistribuTECH 2016 in Orlando, Fla., we wanted to jot down some brief, daily thoughts on some of the things that we saw both around our booth and at the show in general. Record number of attendees! We were pretty excited to hear that there were a record number of attendees at this year’s show. It’s an exciting time to be a part of the utilities and energy industries. Lots of changes, some really great and innovative new technology, and a bevy of thoughtful people makes for a good trade show! Wearables?! Where are we, CES? No! Wearables are not just for the consumer-driven recreational technology market. Wearable technology has the chance to change the way our boots on the ground and in the field work. The adage about working ‘smarter, not harder’ certainly applies to some of the companies developing wearable technology for the industrial sector. Great speakers abound! With a huge portion of the journalism industry in shambles, publications like PowerGrid International (one of several from PennWell) really stand out for its consistently solid and informative material. It’s always great to see the ‘Ink-Stained Wretches’ get their due, and Teresa Hansen, editor in chief of PowerGrid International and Electric Light & Power, gave an excellent keynote on the first day. Hey, look at us! It’s always a little uncomfortable talking about yourself, but we are incredibly excited about the future at FreeWave, and many of the people we talked with who came through our booth – attendees, media, analysts, customers, etc. – were excited as well, namely about our new WavePro WP201 wireless shorthaul Wi-Fi solution. There are some features that we’re especially proud of, including the high-speed Voice, Video, Data and Sensor Data (VVDS) transmission capabilities, the self-healing one-mile industrial Wi-Fi hotspot and the ability to achieve maximum throughput. We’re excited for day 2 – keep an eye out for us!